E-mail: steelrope@live.com
Contact Us
TEL: +86-513-81182737
E-mail: steelrope@live.com
Address: No.151 Of Ruixing Road, Development Zone of Nantong City, Jiangsu China
Stainless Steel Food Grade Sheet/stainless Steel Plate TISCO Mill/slit Edge 304/304L 316/316L 0.4mm Polished National Standard Cold Rolled

Stainless Steel Food Grade Sheet/stainless Steel Plate TISCO Mill/slit Edge 304/304L 316/316L 0.4mm Polished National Standard Cold Rolled

Stainless Steel Sheet/Stainless Steel Plate 1,Grades are :409,410,420J1/J2,430,201,304,304L,316,316L,309S,310S,321,904L...... 2,Surface: 2B/BA/No.1/No.4/HL/brushed/satin/mirror/etching...... 3,Thickness: 0.1-120mm(usually0.1-3mm for cold rolled; 3-120mm for hot rolled) 4,Certificate:...

Stainless Steel Sheet/Stainless Steel Plate

1,Grades are :409,410,420J1/J2,430,201,304,304L,316,316L,309S,310S,321,904L......

2,Surface: 2B/BA/No.1/No.4/HL/brushed/satin/mirror/etching......

3,Thickness: 0.1-120mm(usually0.1-3mm for cold rolled; 3-120mm for hot rolled)

4,Certificate: ISO,BV,SGS,ROSH and other third test.

5,Standard size: 

1000×2000mm,1219×2438mm=4ft×8ft,5ft*10ft=1524×3048mm.

1250×2500mm,1500×3000/6000mm or as your needs

6,Package:

Fumigation free pallet,iron pallets,water proof papers,interleaved paper,pvc film,20'GP or 40'GP container.

7,Delivery time: 3-5 days for standard sizes,other quantity is according actual situations.


Features of Stainless Steel  sheet 316L

Corrosion Resistance of Stainless Steel Sheet/plate 316L

Stainless steel 316L has excellent corrosion resistance in a wide variety of environments and when in contact with different corrosive media. Pitting and crevice corrosion can occur in environments containing chlorides. 


Heat Resistance of Stainless Steel Sheet/plate 316L

Stainless steel 316L has good resistance to oxidation in intermittent service up to 870°C and in continuous service to 925°C. However, continuous use at 1425-1860°C is not recommended if corrosion resistance in water is required. 


Cold Working of Stainless Steel Sheet/plate 316L

Stainless steel 316L readily work hardens. Fabrication methods involving cold working may require an intermediate annealing stage to alleviate work hardening and avoid tearing or cracking. At the completion of fabrication a full annealing operation should be employed to reduce internal stresses and optimise corrosion resistance.


Hot Working of Stainless Steel Sheet/plate 316L

Fabrication methods, like forging, that involve hot working should occur after uniform heating to 1149-1260°C. The fabricated components should then be rapidly cooled to ensure maximum corrosion resistance.


Heat Treatment of Stainless Steel 316L

Stainless steel 316L cannot be hardened by heat treatment.


Machinability

Stainless steel 316L has good machinability. Machining can be enhanced by using the following rules:

1,Cutting edges must be kept sharp. Dull edges cause excess work hardening.

2,Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

3,Chip breakers should be employed to assist in ensuring swarf remains clear of the work

4,Low thermal conductivity of austenitic alloys results in heat concentrating at the cutting edges. This means coolants and lubricants are necessary and must be used in large quantities.


Surface Finish

Definition

Application

2B

Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.

Medical equipment, Food industry, Construction material, Kitchen utensils.

BA/8K mirror

Those processed with bright heat treatment after cold rolling.

Kitchen utensils, Electric equipment, Building construction.

NO.3

Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.

Kitchen utensils, Building construction.

NO.4

Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.

Kitchen utensils, Building construction, Medical equipment.

Hairline

Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.

Building Construction.

NO.1

The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.

Chemical tank, pipe.

Related Products
Inquiry
Copyright © Nantong Newjianghai International Trade Co.,Ltd All Rights Reserved.